15.02.160 LI – Limited Industrial Zone District.
A. The Limited Industrial Zone District is intended to provide sites for moderate- to low-intensity industrial uses, commercial services and light manufacturing. The regulation of uses and standards of development set forth in the LI District are those deemed necessary to provide the proper environment for the efficient and desirable use of this type of industrial land, and to provide the proper safeguards to protect nearby residential, commercial, and public uses.
B. Land uses are permitted as shown in the schedule of uses in PMC 15.02.230.
C. Lot and building requirements shall be as shown in Table 2.9.
|
Standard |
LI – Limited Industrial District |
|---|---|
|
Minimum Lot Area |
6,000 square feet |
|
Minimum Lot Width |
60 feet; 160 feet when adjacent to a residential zoning district, school, or park |
|
Minimum Lot Depth |
100 feet; 200 feet when adjacent to a residential zoning district, school, or park |
|
Maximum Lot Coverage |
80% |
|
Minimum Front Setback |
25 feet |
|
Minimum Side Setback |
10 feet; 100 feet when adjacent to a residential zoning district |
|
Minimum Rear Setback |
10 feet; 100 feet when adjacent to a residential zoning district |
|
Minimum Setback from Streams and Rivers |
25 feet from the normal high water line |
|
Minimum Setback from Residential District |
50 feet |
|
Maximum Height |
40 feet |
(Ord. 711 §1 (Exh. A), 2017)