Skip to main content
Loading…
This section is included in your selections.

A. The Low Density Residential Zone District is intended to provide for single-family residential uses as a transition between rural agricultural areas and higher density residential development.

B. Land uses are permitted as shown in the schedule of uses in PMC 15.02.230.

C. Lot and building requirements shall be as shown in Table 2.2.

Table 2.2. Low Density Residential District Standards

Standard

LDR – Low Density Residential District

Minimum Lot Area

.25 acres/single-family dwelling; 9,000 square feet/attached dwelling unit

Minimum Lot Width

75 feet

Maximum Lot Coverage

50%

Minimum Front Setback

20 feet

Minimum Side Setback

10 feet or 1/2 the height of the building, whichever is greater

Minimum Rear Setback

20 feet

Minimum Setback from Streams and Rivers

25 feet from the normal high water line

Minimum Setback from Shared Driveway

20 feet from the edge of the driveway easement

Maximum Height

35 feet

Maximum Dwelling Units Per Acre

4.0

(Ord. 711 §1 (Exh. A), 2017)